Discussion Locked

Can I break a partitioned hard-drive?

0 helpful
11 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Is it possible to break a partiion on a hard-drive? If so, how? I have an older computer with 3Gg hard-drive that is partitioned into a C: and D: drive, each drive being 1.5 Gg of storage. I want to break the D: partition with an ending result of a 3Gg C: drive.

11 replies

by timwalsh

The short answer is yes. However, the method you use will depend on your goals.

If your intent is to delete the D: partition and add the space to the C: partition, without losing any of the data on C:\, you must use some 3rd party software such as Partition Magic by PowerQuest.

If your intent is just to have a single partiton on the drive and you plan on reinstalling your software, you can simply use the fdisk utility from a DOS or Win9X boot disk, or the installation program on the WinNT/2K/XP installaion CD.

Caveat: The size limit for logical drives using the FAT16 file system in Windows 95/98 and MS-DOS is 2 GB.

by netuser

No, unless you use a third party program like partition magic. Otherwise, you have to repartition the drive as one, but lose all your data. However, if you don't have any data on it, then you can use your startup disk to delete the D partition.

by xpertdragon

I believe you are referring to the joining up of (2) separate partitions, to reach the total capacity of the drive. is that correct? If som you would need Hard drive partition merging software to get the job done. Software such as Partion Magic would help you achieve this.

Paul

by thechas

Just a side note here.

If you are running Windows 95, most versions ONLY support FAT16. (W95 version 2.5 "C" has FAT32 support)

This limits you to 2GB per partition.

That might be why the drive was partitioned into 2 drives.

Also, accidents can happen, back up ALL critical files before using Partition Magic, or any other partition manager.

Chas

This discussion is closed to new replies.