Discussion Locked

can i have 2 or 3 scsi card in a pc

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
can i have 2 or 3 scsi card in a pc to have more than 4 harddisk

7 replies

by jwilczyn

Yes, you can have 2-3 SCSI card in you PC. You can connect up to 7 devices to each SCSI card. Then you can connect 4 HDs to one SCSI card. If you will use more SCSI cards, as you want 2-3, you may have same problems with IRQs.

by allan

If you buy the right SCSI card you can have up to 15 devices on it. It's a good idea to balance out fast & slow devices across different adapters to get the best perormance. If all your devices are fast - ie Hard Disks then you won't see much of a performance increase by using multi adapters over one adapter. If you put a scanner on there is little or no performance degradation because of it.
Draw out the device list for each adapter - it's easy to end up with one adapter not terminated properly - I would advise adding adapters and their devices one at a time until you have the config you need.
In the SCSI BIOS at boot you just need to set 'Multiple LUN Support' to ON or whatever the adapter needs.

by estebandelatorre

Yes, the first will be host=0, the second Host=1 up to 7.
Remember that with only ONE scsi card you can manage up to 7 scsi devices (mixed of scanners + cdw + HD's + etc) any combination that you want. Only you have to consider two things:
1.- SCSI ID (usually a jumper) must be unique all long the scsi cable. Usually the CARD defaults to scsi ID=0 or 7 and your disk 1, 4, just a free id.
2.- When you have different scsi RATES, that is to said a 33mbps HD VS. a 160MBPS HD, the scsi bus willdefault to the less hd transfer rate, that is to said 33MB. Under tese conditions you should consider adding a second scsi card (not sharing the same irq) to manage the full power of the 160MBps HD.

This discussion is closed to new replies.