8 replies
by thechas
No, an AGP card CANNOT be plugged into a PCI slot.
The connectors are different.
They have differnt pin counts, and signal assignments.
PCI connectors are "normally" white.
AGP connectors are "normally" light brown.
There are 2 other thingsthat you need to pay attention to when installing a new video card in an older system.
Do you have on-board, or built in video?
If so, when you install the new card, you need to disable the on-board video.
Depending on the system, it can be a combination of jumpers on the mother board, and / or BIOS settings.
If you do not have on-board video, I would assume that this is an older mother board. Perhaps a Pentium MMX style.
Make sure that you have a fast enough CPU, and enough RAM and free hard drive space to support the new video card.
This may further limit your choice of new cards.
Chas
by thechas
One more thought, you may only have a PCI slot open, but your existing video card may be an AGP card.
Remember to properly uninstall the old video card before shutting the system down to change cards.
1. Look in add / remove programs for drivers or utilities related to the old card, and remove them.
2. Go to device manager, and remove the display adapter.
I also recommend that you download and install the latest drivers for your motherboard / chipset before you install the drivers for the new video card.
Chas
by fong829
by dmiles
Check the motherboard manual,it will have a illustration of the motherboard to show the available AGP and PCI slots
The card will go in the slot but the connectors will not match up to the card connectors on the board,to which you will not have the correct number of connector pins to make contact.
PCI card has more fingers than does a AGP card
There may be a PCI slot open because of the number of slots on the motherboard,it also may have an AGP slot which may be in use by the current card
To check for the type of card that is installed,
Open the Control Panel,double-click the Display icon,select the Settings tab,click on the Advanced button,select the Adapter tab,where it specifies Adapter type click on Properties and then readthe properties panel to see what type of card is installed
by fong829
by fenaikh
Hi
The answer to your question "I want to know if a AGP card goes into a PCI slot?" is not quit. For these reasons:
1- Physically they are different.
2- you will have a system BIOS and chip compatibility. AGP is based on the PCI 2.1 64-bit extension.
3- you need driver specially written for it.
My suggestion is to see what type of graphics card you have. You may have AGP already in your system as built in the motherboard or installed in AGP slot.(The slot is usually near the CPU it isbrownish color).If you want to know the easy way then take it to a shop and ask them which is the best graphics card you can install in your PC.
Good luck
Mohamed
Hint:
You need to know your motherboard brand to know which graphic card does it support.
by fong829
by fong829
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending