Question Locked

can i use an ide connector of a 3.5" hdd enclosure on an internal dvd write

0 helpful
14 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

i need the cheapest dvd writer setup i can come up with for my laptop even if it is crude using the sources i have now. i have found a good deal for an internal LG dvd writer here. i also have a 3.5" hdd enclosure.

can i use the USB to IDE connector of my 3.5" hdd enclosure on any internal dvd writer drive so i can connect it to my laptop?

my reason why i opt for a crude setup instead of getting an external dvd writer is because i will use the internal dvd writer later on when i build up a desktop.

thanks in advance for your help!

14 replies

by thumbsup2

You'll need an external power source for the enclosure, but the IDE connection should work the same as it does if the drive was connected internally.

Also, I'm not sure how you would jumper the drive (master/slave). But, I think it would go jumperless just like a HDD would be if it were in the enclosure. I may be wrong.

And, one last consideration. Will the drive physically fit into the enclosure? They usually fit into a 5 1/4" bay.

by ---tk---

with this post. I would try setting the jumper to CS (cable select) though.... also add some duck tape too... No hack job is a true hack job with out the duck tape :).... "If you cant duck it, **** it!"

by oh smeg

You have to use it as often as possible. Though personally I prefer the 200 MPH Tape that is used in F1.

It holds much better than normal Duct Tape and has a better range of colors. :D

Of course the down side is it doesn't come off as easily which is a bit of a nuisance when the time comes to remove things. :(

Personally in a case like this I would wrap the unit in Shrink Wrap Tape shrink it down to produce a liquid prof seal and then use Duct Tape to make it look pretty. :p

Col

by marc_olivier_cc

You're better off getting a case for your dvd writer that "transforms" it into an external one, but I'm unsure wether or not hey sell those without the dvd writers themselves.

by oh smeg

But you'll need the external Power Supply always connected and you'll have to scrap the casing of the external Enclosure as a 5.25 Inch Drive [b]Will Not[/b] fit into a 3.5 inch enclosure.

It will be messy and if you drop anything onto the Interface Board you may destroy everything that is currently connected but it will work.

And BTW the DVD Drive needs to be set to Master with most of these Interface Cards.

Col

by oh smeg

Ferrari Red is much better as it goes faster. :^0

You always need the speed when you use this stuff. :D

Col

by .martin.

try looking for something like this: http://tinyurl.com/6b56vg

I have used one many times, ranging from hard drives to DVD drives.

it is good in the fact that it comes with the IDE to USB cable and the power adapter.

by oh smeg

When the Yamaha 250 & 350 Factory Racing Bikes came with Red Frames.

All of the Want to be's painted the frames of their RD Yamaha's red and made out that they had a Factory Racer where as we who actually did have the Factory Racing Bikes stripped them down to parts when they arrived painted the frames Black well Powder Coated them Black at least because it was cheaper than red and much more importantly it was done in 2 days as apposed to needing to wait for the Powder Coaters to have enough things to paint red to fill the oven to paint.

Even when the frames got badly bent the paint didn't flake off but just cracked. Now that was my idea of a great paint job. :D

But all the want to be racers used to tell us to paint the frames red so that people would think that we had factory racers. The fact that the guys ridding our bikes blitzed the field most times and won almost everything didn't matter because the frames where not red they had to be slower. So ever since that time we have always said that Red is Faster for that reason.

With the Racing bikes we needed a good finish but fast. It's just wasn't acceptable to leave a couple of frames for 6 months to get them back red. But if it was one of the Green Frame 750 SS Ducati's I may have though differently. But I don't think so. ;)

Of course if it was a Restoration Project as apposed to a racing bike that's a different story but I don't do that type of thing except for myself these days.

Col ]:)

by larryd4

All internal devices are grounded, electronically, to the case itself. If you use an external DVD burner via an external HDD enclosure you may be losing a ground connection.

Another, open ended question,

A DVD writer will use a massive amount of bandwidth over the USB channel. Depending on the speed of your system you may end up with a coaster maker rather then a DVD burner.

This discussion is closed to new replies.