2 replies
by tek-12's Accepted solution
by kingbackwards Accepted solution
There are three common failures:
1. The drive was shaken or dropped (intentionally or not) to the point where it may have broken the drive and wont be recoverable.
Detectable by the drive clicking or not spinning up when plugged in.
Confirm by taking it out of the enclosure and putting inside the machine to see if the data is still there. If not, this was the failure
2. The Power supply failed.
Detectable if it doesn't look like its powering up when plugged in or may light up but just not register when connected.
Confirm by using a different power supply. If it works correctly with a new power supply, this was the failure.
3. The USB/Firewire Connector or Chip is broken or dead.
Detectable if the cable feels loose, makes partial connections or doesn't register when usb plugs in, but works with firewire plug (or vise versa).
Confirm by using another cable, port or enclose.
The last two can be worked around if you take out the drive from its enclosure and put it inside a desktop or another enclosure that isn't broken.
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending