Question Locked

Cannot read a cd on my multidrive dvd/cd writer

0 helpful
8 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
One day my OLD LG multiwriter dvd/cd writer worked fine. The next day it did not. I went and purchased a NEW Liteon Multiwriter dvd/cd writer. I found it still could not read a cdrom. It read a dvd ok. It will not display any contents of the cd or recognise it. I update the drivers for it..no help. Any ideas? I think my Windows XP has lost a file somehow. What could I check to make this work again. I even disabled my Patin Couffin Engine but this did not help. I then updated it but this did not help. I deleted my burner program, but this did not help. I need some ideas to try otherwise I may have to reformat the hard drive as a last resort. Please advise.

8 replies

by hal 9000

You can try System File Checker, open the Run Box type in [b]SFC[/b] and insert the Window CD and then tell the utility to restore any altered System Files.

Just a word of warning if you run this utility any Service Packs and Patches that where not originally installed will be removed but at least it should get windows back to a default configuration which should work.

It may be worthwhile to try a Live Linux before you do this just to make sure that the Combo Drive is actually working. With any Live Linux you boot of a CD/DVD depending on the version that you download and that has no affect on any already installed OS it rust runs off the CD/DVD and in Virtual RAM. If you are unable to load a Live Linux CD you know that you have problems with the reader.

It's a fast and simple test that may save you quite a lot of time because if you are unable to read a CD you will most likely be unable to use SFC either.

If you don't already have a copy of a Live Linux you should be able to get one as a Cover CD on most Computer Mags or you can download one from here of if you like and don't have a fast enough Internet access you could buy one from here though I'll not guarantee how good their service is as I've never used it to buy any of the listed Distro's.

http://tinyurl.com/23nmq

Col

by bayliner58

Hi Hal 9000
I tried to use the RUN box: SFC. It would display for 1 sec and disappear. I suspect a problem. I checked out the Live Linux as you suggested but they displayed so many options/versions. I could not decide on which one to use. Any ideas? I am still open to options to try. Thanks for your time so far.

by hal 9000

That may be of use to you to fix some Windows problems down the track.

Col

by bayliner58

Hi. Tried to download a Linux Knoppix-std-0.1 @ 496mb file. Part way through this my antivirus stopped it. My system self rebooted. I discontinued the download. Any other ideas? I am proceeding to transfer files & folders to another computer via my flash drive. I hope not but may have to reformat all to continue. Please advise if possible. Thanks.

by hal 9000

As you may have a Hardware problem and not a software problem?

Col

by bayliner58

I am on my 3rd drive. The last two where new. Still the same problem. That is why I thought it was software or a setting that is not correct. I have not been able to determine this yet. I am running out of ideas.....?

by hal 9000

If so test the DVD/CD drive in that and see if it works properly.

It at this stage if it works OK would be a good idea to copy the XP Install CD to a blank DVD and work with that as at least by the sounds of things you can read DVD's just not CD's and as these use different Lasers it's still possible that one is working OK while the other is Faulty.

Depending on where you get the replacement Drives from some places hand out returned drives as replacements because they can not be bothered returning them or waste the time in actually testing them as this costs them money and they don't have enough staff to manage this. While I haven't seen this with DVD Drives I've certainly seen it with M'Boards where I get the repairs after the original seller has repaired it several times and it's still not working. I've pulled faulty M'Boards out returned them only to find that I've been sent the same one back that I sent in or I've got an older one in replacement to the one that I returned that's a different model and will not support the CPU or RAM that the returned M'Board had fitted to it.

This really depends on where you bought the drives from as to how they work.

Just a quick test insert the Install CD and boot the computer and then enter BIOS and set the Optical Drive to the First Boot Device and see if it will boot off the Windows CD. If it does you have a Software problem which will most likely require the saving of all your data then wipe the HDD and reload.

If it can not read the Install CD the Drive is faulty as at the very early stage of the start up process all you have is hardware running so there can be no software problem involved.

However if you get it to boot off the Install CD try the following and do an In Place Install

http://tinyurl.com/g4bv8

Please note if you have used Windows Encrypted File System or another method of encrypting your data you'll have to save it all first as well as the encryption key or you will loose all of your data and it will not be possible to recover the encryption key cheaply so you should backup both the data in an unencrypted form or if you have already overridden this and forced the unit to backup the data encrypted you'll need to save your encryption key by following the directions here for Windows EFS

http://tinyurl.com/3cd8hf

If you are using a different Encryption System you'll need to follow the manual on how to save the key. Also remember that some M'Boards have their own Encryption Chip on them so if you have one of these M'Boards you'll need to read the Manual to find out the recommended way of backing up the Encryption Key.

Col

This discussion is closed to new replies.