Discussion Locked

Can't connect to internet thru dial up m

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi

I would like your advice on my computer that won't connect to the internet. It has a dial up modem and you hear it try to connect but it doesn't. It comes up with error #678

HP Pavilion Model # 6835
797 MHZ
128 MB RAM
Intel Celeron Processor
Windows XP Professional 2002
Free 25.2 GB
Total 27.9 GB

This is the message I was able to log when it was try to connect:

Any suggestions on what to do?

Thank You

Paul Wojciechowski
815 675-2579
paul3@joltmail.com

02-17-2003 11:58:04.981 - File: C:\WINDOWS\System32\tapisrv.dll, Version 5.1.2600
02-17-2003 11:58:04.981 - File: C:\WINDOWS\System32\unimdm.tsp, Version 5.1.2600
02-17-2003 11:58:04.981 - File: C:\WINDOWS\System32\unimdmat.dll, Version 5.1.2600
02-17-2003 11:58:04.981 - File: C:\WINDOWS\System32\uniplat.dll, Version 5.1.2600
02-17-2003 11:58:04.981 - File: C:\WINDOWS\System32\drivers\modem.sys, Version 5.1.2600
02-17-2003 11:58:04.981 - File: C:\WINDOWS\System32\modemui.dll, Version 5.1.2600
02-17-2003 11:58:04.991 - File: C:\WINDOWS\System32\mdminst.dll, Version 5.1.2600
02-17-2003 11:58:04.991 - Modem type: Lucent Win Modem
02-17-2003 11:58:04.991 - Modem inf path: oem3.inf
02-17-2003 11:58:04.991 - Modem inf section: Modem_PCI_DF
02-17-2003 11:58:04.991 - Matching hardware ID: pci\ven_11c1&dev_044e&subsys_044e1235
02-17-2003 11:58:06.172 - 9600,8,N,1, ctsfl=1, rtsctl=2
02-17-2003 11:58:06.172 - Initializing modem.
02-17-2003 11:58:06.182 - Send: AT
02-17-2003 11:58:06.202 - Recv: AT
02-17-2003 11:58:06.212 - Command Echo
02-17-2003 11:58:06.212 - Recv: OK
02-17-2003 11:58:06.212 - Interpreted response: OK
02-17-2003 11:58:06.222 - Send: AT &F E0 &C1 &D2 V1 S0=0\V1
02-17-2003 11:58:07.324 - Recv: AT &F E0 &C1 &D2 V1 S0=0\V1
02-17-2003 11:58:07.354 - Command Echo
02-17-2003 11:58:07.354 - Recv: OK
02-17-2003

4 replies

by jkaras

Error 678 means there was no answer, handshaking didnt happen. Did you alter your dial up connection in any way? Did you add call waiting or attempt to disable it? Reccommend that you go into the modem properties, lower the speed to 57600, recreate a new dun preferably with the dns numbers supplied by provider, also may want to ask for alt number. In some areas area codes are needed (10 digit dialing to accommodate population growth) Further since you have a lt win modem try going into the properties of the modem click extra settings button and add the init string of S38=0 to fine tune the modem. Lastly hit ctrl+alt+delete to bring up task mgr find rnaapp and end task it, reboot then attempt to connect, modem might be hangin ( this should only be running when connecting)

by deadly ernest

Check that your dial up software is using the right country codes for the country you are in. The few times I had a problem similar to this it was corrected by setting the country codes properly; and once by getting the latest driver from the modem manufacturer.

This discussion is closed to new replies.