Bravo.... all three excellent answers!! Yes I am an electronic technician and it appears these guys know what they are talking about!
The main things are 16 volts and up, the same 220 microfarad, observe polarity (most times in quality circuit boards all the components will be oriented in the same direction.. so observe where the plus points to on the other caps, if they all point in the same direction then it is a good bet to install yours the same way. Dan makes a very powerful observation however.. "The real issue you have to deal with is WHY did it burst. Often, another part failed and, in turn, caused the capacitor to fail." You should be very aware that there could well be some other component failure, defective diode or some over voltage situation. I think you will however, discover as we all have, troubleshooting can be fun!