Discussion Locked

Capturing network printer port

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Have a network printer, running 2000, that has an TCP/IP connection.
Need to capture the port so we can print our DOS forms. How do we map this printer so we can capture it?

7 replies

by tora

Select the printer that you need to print the DOS forms, right-click and goto properties. Click on details, select CAPTURE PRINTER PORT. Use LPT1 and enter the path of the printer. Ensure that reconnect after logon is also selected. Click on OK. This can also be done when setting up the printer for the first time.

by hiltont

Hi,

Both answers above will achieve a similar result, but the second response (using the "properties" page of the printer on the workstation (assuming this is NOT a DOS-based PC) will allow this capture to survive a reboot more sucessfully.

Ifthis PC is a DOS-based (not Windows-95 or 98 or ME or NT or 2000) then the first response is the correct one.

Regards,
Hilton

This discussion is closed to new replies.