12 replies
by sgt_shultz
yikes! don't do it! but if you insist:
http://www.stg.brown.edu/~sjd/wiring/CAT5-wiring.html
I hire it done by folks in that business and i get 'em to test it with their (expensive) test tools and certify it. Then when I have odd problems, I can eliminate the in-the-wall wiring as a high probability cause...'cause bad wiring can really eat up those evenings and weekends...good luck, just my 2 cents
by tladams
by ann777
by joseph moore
techrepublic.com has their own CAT5 wiring diagram available here:
https://www.techrepublic.com/download_item.jhtml?id=dr00320001005det01.htm
(please remove any spaces)
hope this helps
by tladams
by alpha-male
by tladams
by josevs
If the cable is going to be use for two diferent devices you use the straight-thtough cable, which mean,:
1 Orange/white (R+) 1 Orange/white
2 Orange (R-) 2 Orange
3 Green/White (T+) 3 Green/white
4 Blue (n/a) 4 Blue
5 Blue/white (n/a) 5 Blue/white
6 Green (T-) 6 Green
7 Brown/white (n/a) 7 Brown/white
8 Brown (n/a) 8 Brown
If the devices are the same you need a croosover wiring, which meanthat you will wire the cable by crossing the signal example: t+ with r+ etc...
by tladams
by tladams
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending