Discussion Locked

CC820 Motherboard & ATA/100 Controller

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have an Intel CC820 currently with an ATA66 controller. I'll definately get a faster transfer rate on my 7200RPM HDD with a faster controller.

I can't seem to find anywhere that the CC820 will accept a ATA100 controller.

Is it just a simpleswap? Might I have to upgrade the BIOS?

Thanks

4 replies

by b_pope

you just have to pop it into one of your PCI slots. the only problem would be your hard drive, if it's only ATA66 adding a ATA100 control will have no effect. if your drive is ATA100 then it will speed things up. Maxtor & Promise technologies have recently come out with ATA133 drives & adapter cards, compatible with ATA66 MB.
But the adapter cards won't speed up transfer rates of lower ATA drives.

by b_pope

I don't know if your aware but Intel has posted a notice on their site in regards to the CC820 MB. If your MB has one of the MTH (memory translator hub)components, you could get a refund or replacment MB. You'll need to visit the site & download a program to determine this. It causes your system to reboot & lockup.
http://www.intel.com/support/mth/overview.htm

by pa_sharp

Thanks to both.

I believe it is an ATA 100 drive. I also noticed the mobo thing on the Intelsite. I'll have to download that item.

This discussion is closed to new replies.