Discussion Locked

CD-Burner

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Dear Tech Rebpublic.

Your Jul 9 article on the disappearing CD-rom was most helpful in restoring my CD-Rom reader. I am at a loss however on the following problem. When I changed the REGISTRATION FILE, I went to the HKEY_LOCAL MACHINE\SYSTEM\CONTROLSET001 area and updated that to Read "Samsung cd-rom drive model (etc)" . However when I reconnect the CD-Burner both drives disappear. I think that this REGEDIT fix only enables the machine to recognize the CD-Reader. How do I update the REGISTRATION file to see both drives at startup and not have one cancel out the other. I am almost 99.9999% convinced that the hardware is intact. The system is so new that it isn't even paid for yet.

I would appreciate any help you can offer.
Thanks
Harold.L.Gary@BGE.com

5 replies

by dmiles

Open the Device manager panel and see if they are listed
You did not mention if you had them connected on the same controller or not this may cancel one out.
Connect the cd-rw to the master as the slave drive,and connect cd burner to the secondarycontroller as master or slave whicever would apply.
Open the CMOS panel in Bios,and make sure that the drive configuration is set to auto detect.

by joe mcglubglub

What OS are you using? I had the exact same problem with a Win2K Server installation. I was using Adaptec ECDC Creator and upon installing Direct CD...my CD Drives disappeared. Microsoft for you! I ended up having to reinstall the OS and NOT installDirect CD.

I hope this helps...

This discussion is closed to new replies.