Hardware

Ask something
Discussion Locked

cd duplicator

0 helpful
5 replies

by yelhsa3840 1 view

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
i got a single cd duplicator (standalone) and i put my burner and cd rom in it (cd-r master) but i cant get it to copy theres 2 buffer led's on the front and they keep blinking wen i push the record button the drives open could use a littlehelp if they have to be set up a certain way there ide interface

5 replies

by thechas

Please provide the hardware details.

Check the manual or web-site for the duplicator and make sure that your drives are supported.

Chas

by thechas

You need to identify the make and model of the duplicator and your drives.

You can try swapping the jumpers on the drives so that you change who is master and slave.

However, I suspect that you need to access a set-up mode to allow the duplicator to find and configure the CD drives.

See if you can get any more information from where you bought the duplicator.

Chas

by yelhsa3840

theres no other info i can give there isnt any serial numbers or...anynumbers on it if it helps on the front it has one big purple button for record

This discussion is closed to new replies.