Discussion Locked

CD / DVD Trouble

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I've trouble with my Creative 1234 DVD-CD-rom Player. When I start up my computer, the Bios detects the player and it starts to work (green light flickers). But when I insert a cd or dvd in the player, windows and/or dos don't recognize that there is a cd in the player. What's wrong??

5 replies

by cg it

Did you install the drivers? Eventhough your System BIOS detects the hardware, your O/S will require some sort of driver for you to use it. What O/S are you using? Windows based you can check the status of your device and load driver by going to start,settings,system,hardware,device manager. Once you've opened up Device Manager you should see [usually under display adapters, but not always]DVD/CD-ROM. Expand that Icon and your devices should be listed. Left Click to open the device properties. From there, make sure the device is enabled, You can open also use the troubleshooter.

by thechas

Usually, there are 3 issues here.

Is the cable connected properly, and the master slave jumper set correctly?

You may need to enable / disable DMA mode for the drive in BIOS settings. (try both ways)

Or, you need to update the IDE bus driver for your chipset or motherboard.
Check out either www.motherboards.org
or www.wimsbios.com
if you need help identifying your motherboard and locating a source for to download the file from.

In addition, to play DVD movies, you need to eitherhave a video card with a built in DVD decoder, a hardware decoder card, or a software decoder program.

Chas

This discussion is closed to new replies.