11 replies
by jon_w31
I believe the colours are chosen by the manufacturer to show a difference between their disk range. eg. gold-top joby, silver-2nd best and so on.
However judging by a number af test results, I have read about it's all a bit hit and miss. High quality cdr's seemed to give as many errors as standards.
I use the cheapest I can buy and make two copies. Works out cheaper and just as effective.
by cledwards
by ulf c
by cledwards
by syadm
The coating has two purposes.
1. Act as background for CD reader, preventing unwanted interference by laser reflections from outside of the disc.
2. Protect disc from being damaged by UV-radiation(sunlight) which causes radial cracks in disc.
Use media with thickest, untransparent coating and avoid exposure to sunlight.
by cledwards
by sui4goo
by cledwards
by mussen
gold/gold phtalocyanine dye
less tolerance to power variations
invented by mitsui toatsu chemicals
less likely to work in wide variety of drives
gold/green cyanine dye
more forgiving of disc read/write variations
rated life span of 10 years
developed by taiyo yuden
used during the development od cdr technology
silver/blue azo dye
developed by verbatim
similar performance to green + rated for 100 years
by cledwards
by cledwards
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending