Discussion Locked

CD REWriter

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I keep getting the error "Install assistant could not find a suitable IDE controller for the HP CD-Writer Plus" when trying to install my internal HP 8200i cd writer.
It is succesfully detected by windows as a valid drive and i can read cd's from it but the software will not install.
I have tried installing on a second machine with the same error.
One system is running XP the other 2000 Pro.
Can anyone help

Thanks

Gary

2 replies

by thechas

This is a 24X 4X 4X drive, correct?

Are you using the CD that came with the drive?

If so, the software on the original HP CD is NOT compatible with XP, and may not function on W2K.

Download the latest software from HP for the 8200i

Depending on which 8200i drive you have (there are several different drives with the same model number) you may need a firmware update for the drive.

For XP, unless you have SP1, you need to download and install the CD-RW compatibility updates.

Chas

by glyall

first have you check and set the jumpers right?
when install a CD-RW in a PC you should have the harddrive on the first ribbon. If you have a CD-R in the PC too, it should also be on the first ribbon (set jumper to slave)
the CD-RW should be on the second ribbon and set jumpers the master.
It would be great if the motherboard manufactors would put a third ribbon slot on them.
so that you would not have to use a PCI card for the third ribbon.
You and now buy a new CD-RW for under 50 dollars
which you might have to done.

good luck

This discussion is closed to new replies.