8 replies
by dmiles
Verify That the CD-ROM Drive Is Configured Correctly
If you experience a CD-ROM read problem, verify that the CD-ROM drive is configured correctly:
Insert a working CD-ROM into the CD-ROM drive to verify that the CD-ROM drive works.
If other CD-ROMs work in your CD-ROM drive, continue to the next method.
If other CD-ROMs do not work in your CD-ROM drive, continue to the next step.
Right-click the My Computer icon on the Microsoft Windows desktop, and then click Properties.
In Microsoft Windows 95, Microsoft Windows 98, or Microsoft Windows Millennium (Me), click the Device Manager tab.
In Microsoft Windows 2000, click the Hardware tab, and then click Device Manager.
Look for your CD-ROM drive in the list of devices. If the CD-ROM device is displayed with an exclamation point next to it, the CD-ROM drive may not be configured correctly.
by dmiles
Display All Files in Windows Explorer
To display all of the files on the CD-ROM in Windows Explorer:
Insert the CD-ROM into the CD-ROM drive.
In Windows 95 or Windows 98, click Start, point to Programs, and then click Windows Explorer.
In Windows Me or Windows 2000, click Start, point to Programs, point to Accessories, and then click Windows Explorer.
Click the plus sign (+) next to the CD-ROM drive that contains the CD-ROM.
Copy the Autorun.exe file from the CD-ROM to your hard disk.
If you cannot see the Autorun.exe file on the CD-ROM or if you cannot copy the file to the hard disk, you may not be using the latest version of the CD-ROM driver for your CD-ROM drive.
Contact your hardware manufacturer to inquire about howto download and install the latest CD-ROM driver for your CD-ROM drive.
Run Xcopy to Verify the CD-ROM or DVD-ROM Drive
Click Start, and then click Run.
In the Open box, type cmd, and then click OK.
Type the following, and then press ENTER, where drive is the letter of your CD-ROM or DVD-ROM drive:
xcopy drive :\*.* /s > c:\test1
If the XCopy process is not successful, your CD-ROM or DVD-ROM disc is damaged, so your CD-ROM or DVD-ROM drive cannot read it.
by virgoan
by thechas
I suspect that a software installation or update damaged your IDE buss driver.
Download and install the chip-set drivers for your motherboard / system.
I recommend against installing the driver from the CD-ROM manufacture.
The drivers provided by the CD-ROM manufactures are for DOS mode access ONLY.
The Windows driver duties for ALL IDE style CD drives is handled by the IDE buss driver.
You can also try removing ALL 3 IDE drivers from device manager (primary, secondary and root hub)and re-starting your PC.
Windows 'should' install the correct drivers for the chip-set.
Chas
by virgoan
by paulkinsey
by virgoan
by virgoan
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending