CD-ROM doesn't read CD-R, RW
I have a Matshita cd-rom and it doesn't read the r's, rw's....
any suggestions
Hardware
I have a Matshita cd-rom and it doesn't read the r's, rw's....
any suggestions
It would be much easier to help you out if you told a little more about your system.
What OS do you run?
What CD Reader is it exactly?
by felix
by xpertdragon
Some older generation CDrom drives are unable to read CDR's and CDRWs, but lets assume that your Matshita CD-ROM is fairly new or brand new. have you gone out searching for support on the Matshita CD drive? I have owned a Matshita CDR Drive before (8X/40X), and I have found that right out of the box you do have to update the firmware of the drive. This issue is what is importnant about what OS you are running (XP/2000/NT) and that level of interactivity.
Paul M. Chavez
by felix
by felix
I am running win 98 se
it's Matshita 175
by dmiles
by felix
Hi you may find that it wont read discs that are not finalised.
Rich
by felix
by thechas
I looked all over the Matshita site, and couldn't find a model 175.
However, here are some general guidelines;
If the CD Rom speed is 12X or less, it likely cannot read CD-RW disks.
Adaptec (roxio) used to have a list of supported drives. I thought I had a copy on my PC, but cannot find it.
If the CD speed is 24X or greater, or the drive has the "Multi-Read" logo, it should be CD-RW capable.
You will need to install a UDF reader program onto the PC for it to be able to read CD-RW disks.
If the drive is 12X or less, it may have problems reading the tighter track spacing on the 700MB / 80 Min CD's.
Find and try a 650MB 74 Min disk.
If it works, the drive just can't deal with the tighter track spacing.
Also, try different brands and color disks. Some drives have trouble reading the blue and green tinted disks.
Chas
by felix
by felix
This discussion is closed to new replies.
Sort by Trending