Discussion Locked

CD Writer Problems

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have an HP CD writer and I have been finding that all the discs have written on to are becoming corrupted. The burner seems to operating properly so what could be causing this.

7 replies

by timthetoolman

Could be that you're using less than the best quality blanks?

Try lowering the writing speed to 1x and see if you get the same result.

Cheers,
Tim.

by thechas

Check for updates to your burning software.

Also, check with HP for firmware updates to the drive.

Are these 700MB disks on a 650MB drive?
Some of the older HP drives are not compatible with the 700MB disks.

I have also had data disapear when I recorded a multi-session disk on a different drive and software version than the original session.

Another thing that can affect recording quality is "background" programs.
I turn off every piece of software that I do not need when recording.

by jaybubbi

answer 1 will help,and i hope this helps.i had the same trouble with my hp9100 writer in a amd k6/2-350 system.i had to burn everything at 4x.it didnt seem to matter what discs i used.you can set the speed in the writers control panel.

This discussion is closed to new replies.