Discussion Locked

CDROM Drivers

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I was given a Compaq Prosigna 500 server from work. I need to format the drives. The CD drive will not boot. I can not find the drivers to make it work nor do I even know where to start. I looked at Compaq's site but came up empty. I would liketo be able to put the smart start cd in and have it boot. ANY help is greatly appreciated.

TIA

Jon

7 replies

by kcmeister

If the cd-rom is recognized in the bios you can boot from floppy and then access the cd-rom and load from there. Being a server the drives and cd-rom may be scsi. look for scsi utility usually ctr-a, or ctr-m and you can change to boot to cd in scsi utility. Has the cd-rom worked recently? Check that it is jumpered correctly.
Good luck,
kcmeister

by estebandelatorre

DOUBLE CHECK UNDER BIOS SETUP (F10 WHILE BOOTING) IF "BOOT" FROM CD IS ENABLED AND IF IN THE PC BOOT SECUENCE (SCSI,A:,C...), THE CD ROM UNIT IS INCLUDED (LIKE CDROM, A:,C:)

BY THE WAY, PRESARIO 500 BOOTS FROM CD'S

HOPE IT HELPS!!

This discussion is closed to new replies.