Discussion Locked

cdrw/dvd rom

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I bought a computer about 5 months ago. my cdrw/dvd rom works but somtimes when i put in certain discs it doesnt do anything i go to my computer it says there's a disc in there but when i click on it it is displayed like a blank disc. I tried cleaning and my warranty is void. this all happened after i reformated my computer.

4 replies

by lhatcher

More info is needed.
Does this happen on any certain type of disk, or is it just random.

by mattkroniser

It happens on my lexmark z700 series install disc and my comcast highspeed internet install wizard disc.

by dmiles

Check the bios to make sure that CDrw/dvd is being recognized,if so then problem could just be a driver that needs to be updated or reinstall the drive software

by hal 9000

First check these disks in another Drive if you have one available. Being Pressed Cd's they may have scratches on their Data Surface and no longer be readable, or maybe only readable in a different drive with better tracking or a different color laser.

If this is the case you can make a copy of them and try again to install the printer and Internet connections.

Just as a test try recording a CD and see if you can read that one. But it sounds as if the laser intensity has dropped below a level that allows some Cd's to be read. On the up side these Combo Drives are very cheap so it shouldn't be a major issue or pain in the hip pocket to replace the drive.

Col

This discussion is closed to new replies.