Discussion Locked

Checking health of an USB drive

0 helpful
12 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a USB HDD connected to a XP PRO system, and would like to run some kind of scan to ensure there are no bad clusters etc ie something like scandisk on win98.

Anyone recommend me what programs (free trial/shareware), that I can try.

Thanks

12 replies

by hop228a

Thanks for the site.

Downloaded 3 programs that checks HDD health, but none of them are able to check for USB drive.

by hal 9000

You can also run the XP Disk Defragmenter if there are any physical problems on the USB Drive it will spit up and error message and give you the option to run Check Disk.

That's not the best way to check any USB Drive but it quick and currently on hand.

Col

by hop228a

I tried running the XP PRO scandisk and defrag, but once its completed, they don't display a sumaary.

by hop228a

Thanks for the reply.

I already have perfectdisk, but thats just a defrag tool and nothing else, it doesn't surface scan for bad clusters etc.

by hal 9000

I'm going to hate myself for this but I do know that Norton's System Works will Scan USB Drives and report any problems with them. It will also monitor the SMART Status of the drive as well if you can put up with System Works on your computer/s.

If you load this just make sure not to include the AV option as it has a limited Life of 12 months and then you have to strip it all out and perform a reinstall of everything once you replace the AV Product.

Col

by ontheropes

Go to Start/Run and type "cmd". When the command prompt window opens change to the correct drive letter by typing "T:", for example. Once on the correct drive, type "chkdsk /f". Answer yes to dismount the drive and chkdsk will run a scan and fix all errors.

by ontheropes

After chkdsk has run you'll have a report showing:

No. and size in KB of files
No. and size in KB of indexes
No. and size in KB of bad sectors
How much of the drive is in use by the system
How much of the drive is used by the log file
How much space in KB is available
Allocation unit size
No. of allocation units on disk
No. of allocation units available

by hop228a

Ran there programs, unfort. the WD Diagnotics, was showing something around 70 hours to completion, I couldn't wait that long not knowing if the result was like the quick test, just says pass or fail...with no other info as what it fail on.

This discussion is closed to new replies.