Discussion Locked

CISC Vs RISK

0 helpful
1 reply
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
what is the diffrence b/n CISC and RISC hardware design?

1 reply

by guruofdos

CISC is 'Complex Instruction Set Computing', RISC is 'Reduced Instruction Set Computing'. RISC cpu's (e.g. the ARM) have a limited number of instructions (op-codes) but they execute in a very short time (1 or 2 clock cycles). To perform complex tasks, several ops must be used in sequence or a loop, e.g. to perform block transfers in memory.

CISC processors have more instructions which are capable of complicated functions, such as block memory transfers or mathematical functions. Although only a few complex instructions may be needed to perform a task, these take longer to execute, perhaps several tens of clock cycles. It also makes assembler harder to learn.

Some applications benefit from complex instructions, which make programming simpler, others can be dealt with with combinations of the smaller, faster instructions.

The CPU can be made smaller, more efficient, faster and cheaper in RISC designs, as CISC processors have extra registers and internal hardware to process the complex instructions. Decoding the opcodes is also faster on RISC processors as they tend to be single byte or word length opcodes with byte or word operands. On an x86 CPU with extended instructions, it is possible to have instruction codes running to 8 or 10 bytes. These have to be fetched from memory and decoded before the instruction can be executed. A CISC processor may fetch 10 bytes, decode them, process the instruction then manipulate the result in the time a RISC processor has fetched and executed 30 or 40 instructions. If it takes 10 RISC ops to 'duplicate' one CISC op, the RISC machine would still do the task faster (3x-4x) even though it uses multiple instructions.

External to the processor, (RAM, I/O, etc.) there is no difference in principle. It's only the internals of the CPU that define a computer as CISC or RISC

Mike :-)

This discussion is closed to new replies.