Discussion Locked

CISC Vs RISK

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
what is the diffrence b/n CISC and RISC hardware design?

4 replies

by ann777

http://whatis.techtarget.com/

CISC:
The term "CISC" (complex instruction set computer or computing) refers to computers designed with a full set of computer instructions that were intended to provide needed capabilities in the most efficient way. Later, it was discovered that, by reducing the full set to only the most frequently used instructions, the computer would get more work done in a shorter amount of time for most applications. Since this was called reduced instruction set computing (RISC), there was now a need to have something to call full-set instruction computers - thus, the term CISC.

The PowerPC microprocessor, used in IBM's RISC System/6000 workstation and Macintosh computers, is a RISC microprocessor. Intel's Pentium microprocessors are CISC microprocessors. RISC takes each of the longer, more complex instructions from a CISC design and reduces it to multiple instructions that are shorter and faster to process.

by ann777

RISC:
RISC (reduced instruction set computer) is a microprocessor that is designed to perform a smaller number of types of computer instructions so that it can operate at a higher speed (perform more millions of instructions per second, or MIPS).Since each instruction type that a computer must perform requires additional transistors and circuitry, a larger list or set of computer instructions tends to make the microprocessor more complicated and slower in operation.

John Cocke of IBM Research in Yorktown, New York, originated the RISC concept in 1974 by proving that about 20% of the instructions in a computer did 80% of the work. The first computer to benefit from this discovery was IBM's PC/XT in 1980. Later, IBM's RISC System/6000, made use of the idea. The term itself (RISC) is credited to David Patterson, a teacher at the University of California in Berkeley. The concept was used in Sun Microsystems' SPARC microprocessors and led to the founding of what is now MIPS Technologies, part of Silicon Graphics. A number of current microchips now use the RISC concept.

by ann777

The RISC concept has led to a more thoughtful design of the microprocessor. Among design considerations are how well an instruction can be mapped to the clock speed of the microprocessor (ideally, an instruction can be performed in one clock cycle); how "simple" an architecture is required; and how much work can be done by the microchip itself without resorting to software help.

Besides performance improvement, some advantages of RISC and related design improvements are:

A new microprocessor can be developed and tested more quickly if one of its aims is to be less complicated.

Operating system and application programmers who use the microprocessor's instructions will find it easier to develop code with a smaller instruction set.

The simplicity of RISC allows more freedom to choose how to use the space on a microprocessor.
Higher-level language compilers produce more efficient code than formerly because they have always tended to use the smaller set of instructions to be found in a RISC computer.

by ann777

There are no physical (obvious) differences in hardware design. There are instruction sets contained within a processor. One is faster because it is smaller, the other is cumbersome but complete.

This discussion is closed to new replies.