10 replies
Plastic covers are a good idea, especially for the keyboard, but you might also consider installing a new fan filter from time to time.
You can get a dozen computer fan filters for only a few dollars each, depending on the size. It's rather quick and easy to change them - not unlike periodically changing the air filter in your car.
Do a Web search for "computer fan filter", and you'll get thousands of hits. (The same for computer covers.)
Poster rated this answer.
by willcomp
Good idea on filters, but that won't get you clean. Can tell you what I do for super grungy PCs.
Remove memory and cards and clean with a natural bristle 2" paint brush. Wipe with a damp cloth if needed.
Remove CPU cooler and clean fan and fins. Canned air may do, but in extreme cases, remove fan and clean fins with 409 or similar and running H2O. You can also clean fan with cleaner and water, just be sure to dry thoroughly. Possible that fan may not work and will require replacement after this.
Remove power supply and clean with canned air. If really dirty, either disassemble and clean thoroughly, if you feel comfortable doing so, or replace.
Clean rest of case interior with canned air. Pay special attention to air intakes and hard disks.
Although not recommended except for extreme cases, I have cleaned mobos and cards with 409 and running water. These had critter residue (urine and feces) that was eating into exposed metal on boards and had to be removed. Has worked twice so far, but you need to be in an extreme situation.
Our climate is very humid and static precautions are not necessary.
by willcomp
Poster rated this answer.
by thechas
This question comes up from time to time.
To clean your RAM modules, you need either de-ionized water, or a good electronics cleaner from companies such as Chemtronics or Tech Spray.
If you have an electronics parts distributor in your area, they should be able to sell you spray cans or bulk containers of a cleaning solvent.
Or, numerous web based companies will sell cleaners mail order.
www.hosfelt.com
https://webvia.techni-tool.com/VIA5/index.jsp
Are but 2 sources.
As to a case for the PC itself, a simple wooden box with one side open and holding a standard furnace filter will keep dust out of the PC.
You want at least 4 inches of clearance for air flow.
On the PC itself, you can install at least 2 high volume (CFM) case fans with filters on them blowing air into the case.
You need a minimum of 10% (for your situation, I would suggest 20%) more air volume flowing into the case then the total of all exhaust fan air volume.
You need to maintain a positive air pressure inside the case to keep dust from coming in through the various holes in the case and drives.
We have a number of "industrial" grade computers on our shop floor.
Depending on the PC, they have 1 to 3 5 1/4" case fans with filters.
As long as we maintain the filters, no dirt gets into the PC.
Chas
Poster rated this answer.
by wlbowers
We use compressed air 70 psi with dual moisture filters. The nozzle is grounded to eliminate static charge of the rushing air. Ground the computer also.
This will dislodge all but grease contaminated dust.
All of the normal dust bunnies will leave home.
Do this outside. You will be amaized what will come out of that computer.
Lee
Poster rated this answer.
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending