BIOS stands for Basic Input Output System.
The system BIOS IS software.
This software is stored in a special type of memory called Flash ROM.
The advantage of flash ROM is that the software code stored in the ROM can be changed. (BIOS update)
The CMOS RAM on a PC is used to store the customization settings that configure the BIOS to properly function with your hardware.
CMOS stands for Complementary Metal Oxide Semi-conductor.
CMOS is the "technology" of the RAM chip that stores the BIOS settings.
The advantage of CMOS technology is that it requires very little power to save the settings, and can be easily powered for years by a battery.
For most PCs, it will result in less than optimum performance if you simply use the BIOS default settings.
The CPU, memory, and drives may not transfer data as fast as they are capable.
The USB ports may not be enabled.
The printer port is usually not set to the ECP/EPP mode required by scanners and many printers.
The POST part of the boot process can also take longer using default settings. As time will be spent looking for drives that do not exist.
Nearly all "modern" motherboards use Lithium coin cell batteries. These are NOT rechargeable.
However, for nearly all ATX style motherboards, the computer is never completely off.
As long as power is applied to the power supply, a low current 5 volt supply is always present on the motherboard.
This low current supply provides power for the power control circuit, the real time clock, and the CMOS RAM.
So, the battery only is used when power is turned off. Like in a power outage. Or if you use a power strip and switch it off after the computer shuts down.
Yes, there are settings in BIOS setup that can cause the PC to not boot, and could cause data loose on the hard drive.
continued