2 replies
You can try disabling IRQ Sharing on the computer.
See Microsoft article Q279256, "How to Disable IRQ Sharing for 16-Bit PC Cards That Do Not Support ISA-to-PCI Routed Interrupts"
The information in this article applies to:
Microsoft Windows XP Home Edition
Microsoft Windows XP Professional
SYMPTOMS
The R2 PC Card does not start, and you see the following error message in Device Manager:
This device is either not present, not working properly, or does not have all the drivers installed. (Code 10)
Try upgrading the device drivers for this device.
CAUSE
This behavior occurs because some R2 PC Cards do not support interrupt request (IRQ) resource sharing. In Windows XP, 16-bit PC Card (PCMCIA) PCI readers can use R2 PC Cards (the 16-bit ISA type) without requiring an ISA runner paddle to obtain ISA interrupts.
RESOLUTION
See this article at this link:
http://support.microsoft.com/default.aspx?scid=kb;EN-US;q279256
Remove spaces from the pasted URL.
by alj
Nope, I need the IRQ sharing. Here is what I finally did. Since it is apparent that the Linksys devcie driver for the WPC11 version 1 card does not support IRQ sharing and it is also apparent to me that the support at Linksys is very bad I instead put a Siemens Speedstream 1021 card in the ThinkPad T22 and declared victory. The Linksys had worked after the fresh install of XP but it failed to work once I installed IBM ThinkPad T22 specific drivers from IBM. Once I dropped the Speedstream in it took me about 5 minutes to have the T22 up and running. I have been in this business for 30 years and Linksys takes the cake for having a really crummy device driver on this card. I spent in excess of 6 hours trying to fix their problem.
What did I give up? Well, the WAP11 access point from Linksys only supports 128 bit encryption in a proprietary fashion, so I had to step down to 64 bit (40 bit) encryption with the Speedstream. I went out today and bought 2 more. Adios Linksys.
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending