Discussion Locked

Compaq Presario 900 Series RAM

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I was curious if anyone knows what RAM fits in a Compaq Presario 900 series desktop. I tried researching it, and even reading the manual, but even Compaq doesn't know... Any information would be extremely helpful. It says it takes SIMM RAM, but whenpurchasing this click here It did not fit or work with my Compaq. I am now looking to sell this, also, if anyone is interested. Email: Giants17@hotmail.com. Thank you.

5 replies

by thechas

According to Crucial www.crucial.com
The Presario 900 series uses 72 pin SIMM memory, either FPM or non-parity.

http://tinyurl.com/681k

They list a 100MB limit, and say that 4MB is on-board.

There are 3 basic styles of memory sockets:

30 pin SIMM, these were mainly used on 386 and 486 systems.

72 pin SIMM, these can be found on 486, Pentium and Super socket 7 systems.
There were also a few systems that used 80 pin SIMMs.

168 pin DIMM, these are on Pentium, PII, Super 7, Socket A, and a few others.

The 168 DIMM is being replaced by DDR RAM, and RDRAM.

Could you describe the problem in fitting the RAM module.
Were they too long, too short, or not properly keyed?

If htey were the correct length, and pin count, I would purchase memory from either Crucial, Kingston, or PNY.
Order on-line, and they will match the RAM to your system.

Chas

by guruofdos

72 Pin 70nS FPM memory....not 60ns EDO!!! Parity is preferred but it will use NON-Parity...you have to disable parity checking in the BIOS.

This discussion is closed to new replies.