7 replies
by oz_media
by oz_media
Note: Compaq hardware is EXTREMELY proprietary in that it simply doesn't like to be mixed.
If you even install aftermarket RAM in a Compaw server, it performs like crap.
Therefore I would sya that unless you are using Compaq SCSI controllers it just won't be seen.
Also Compaq specifically hardware tests and custom configures it's server system boards, you may have issues without using a Compaq system boards to begin with.
by kmcniff
Poster rated this answer.
by kmcniff
Compaq RAID controllers will only work in a Campaq. The server system board needs to support the BIOS on the card and therefore won't work without a Compaq Server motherboard. I have heard of others that have gotten the Compaq SCSI drives to work on non-Compaq systems, but do not remember what was done.
Thanks
If the Compaq hard disk is intended to be used in a
StorageWorks controller then the StorageWorks bus
has the SCSI ID. The StorageWorks line of storage
products was acquired by Compaq when they bought
Digital Equipment Corporation. StorageWorks was a
DEC product line that ensured that customers had to
purchase disks from DEC due to the proprietary
circuitry on the StorageWorks bus and StorageWorks
disks.
by kmcniff
by pgm554
All the Compaq drives are, is rebranded (OEM) Western Digital or Seagates.I have gotten them to work with many different controllers(Adaptec,Mylex).
You might need to turn on SCAM(SCSI Configuration Automatically) in the BIOS.
Are they terminated correctly?(LVD or Ultra)Active or Passive?
Have you tried setting the SCSI ID's manually?
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending