Computer booting problem
Hey,
I just built a computer and when I turn it on all the fans spin. when I turn on the monitor the fans stop spinning for a second and the monitor says no signil any help?
Hardware
Hey,
I just built a computer and when I turn it on all the fans spin. when I turn on the monitor the fans stop spinning for a second and the monitor says no signil any help?
by birdmantd Accepted solution
by lavendermuffin Accepted solution
by keesb2 Accepted solution
Obviously something is wrong.
Build the minimum configuration (PSU, motherboard, one stick of RAM, graphic card if no onboard graphics) outside the case (om cardboard, for example). If that works, you know that hardware is fine. Then build the same inside the case, and continue from that.
If the minimum configuration doesn't work (and connected correctly) one of the components is defective. Return that.
by jimmy.wick90 Accepted solution
Remove external storage. To determine your boot order, restart your system, unplug any external storage or flash drives, and enter the BIOS by pressing the appropriate key during the startup process. 2. Navigate to the Boot section of the BIOS.
Regards,
J Wick
This discussion is closed to new replies.
Sort by Trending