Discussion Locked

COMPUTER FREEZE

0 helpful
8 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

When ever i do any things in my computer my computer freeze up. I have to re-boot the computer again to start. i can not use ctrl+alt + delete. I am using win 2000 professional. I checked event log for error log everytime it says:
The ptserial service failed to start due to the following errors

No serial device was successfully initialized. The serial driver will unload.

Please give me advice what does it means and what should i do? I am tired of re-booting my computer again and again!

8 replies

by maxwell edison

Greetings,

"ptserial" refers to your PC-Tel WinModem.

You apparently have a device conflict, or this particular device has some configuration issues.

Check to make sure you don't have an IRQ conflict. Check the configuration settings for that device. And/or try removing the device entirely, and your problem should go away. Try reinstalling the device, making sure you have the most current driver for Win2000. Your manufacturer's web site would be the best place to look first.

Good luck,

Max

by maxwell edison

.
.
P.S. If you don't have a PC-Tel WinModem, (or even if you do, and want to uninstall it), go to the Control Panel/System/System Properties/Hardware/Device Manager and look for the conflicting device. (modems is a good place to start.) Remove and/or reconfigure and/or reinstall as necessary.

Regards,

Max

by dogdrake

I want to know if youhad other os on your system before and if it used to pose the same problem at hand.
What is your memory capacity?
plaese reply to dogdrake@hotmail.com asap

This discussion is closed to new replies.