15 replies
by bennettnb
Judging by the randomness, I would first suggest checking cables/connections to make sure they are snug. I would then replace the power supply. This is where I would start.
Good luck!
You are mentioning that fews hard drive upgrade, what was it? If it is ram, maybe you want to consider the incompatible between your old ram and the new ram.
If it is not the problem starter, then i suggest you to change the motherboard. and thensee if it helps or not. Final test, try to upgrade the processor to higher speed or buy just buy a new one.
Hope this will help.
by djent
by willicueva
by thechas
The other answers are all good possibilities.
I have had several different Socket A motherboards give me "strange" problems, with power up being the most common.
The fix for all of these has been to manually set the CPU FSB and multiplier in BIOS settings.
Some Socket A motherboards set the FSB and multiplier incorrectly. For whatever reason, AMD CPUs do not like to run if under-clocked.
I believe that the 1.2GHz Athlon comes in 2 flavors. You need to determine if you have the 200MHZ or 266MHz FSB version.
200MHz FSB version:
For SDRAM, the FSB should be 100MHz
the multiplier 12X
For DDR RAM, the FSB should be 200MHz
the multiplier 6X
Chas
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending