6 replies
by thechas
Actually, it sounds like a CPU over-heating problem.
Many motherboards have the option in BIOS settings of monitoring PC (CPU) health.
They can be set to shut down when the:
CPU over-heats
CPU fan spins too slow
CPU core voltage is out of spec.
Case fan too slow
If your motherboard did not come with a hardware monitor utility, download and run a hardware monitor utility from the links at www.nonags.com
This should let you see what might be triggering the shut down.
You can open the case, and check your CPU fan.
If the heatsink is cold all the way to the CPU, then the heatsink is not making good thermal contact to the CPU.
If the heatsink is hot near the fan, you need a better heatsink and fan.
If the fan does not spin easily by hand, the bearings are bad.
If the CPU core voltage rises out of spec, then you need a new motherboard.
Since this is summer in the northern hemisphere, your case may not be getting enough cooling from just the power supply exhaust fan.
Add at least 1 case fan set to blow air into the case.
You want a positive air-flow so that your fans do not such in air (and dust) through your drives.
Chas
by jeremy
by csmith
This is not a power supply problem.
You did not state the model of Gigabyte mother board, but from the light description , as far as I know, all in that series have a CPU overheat/shutdown setting in the BIOS.
To prove it is an overheating problem, go into the BIOS settings and raise the shutdown temperature one notch higher.
If the PC takes longer to shut down, it is definitely overheating.
The advice about one fan blowing into the case is correct.
One fan must blow in, to create enough turbulance to prevent "dead air spots" inside the case.
Where ever there is dead air, there will be overheated components.
Regards, Chris
by jeremy
by jeremy
by jeremy
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending