Configuration Of a Router
1. I want to configure a router for the first time. Please can you tell me the basic things I must do before I gon on.
2. what is the advantage of a Router over a switch.
Hardware
1. I want to configure a router for the first time. Please can you tell me the basic things I must do before I gon on.
2. what is the advantage of a Router over a switch.
by alpha-male
Without knowing the model of router you're using, I can only be very generic in describing the setup.
What you'll need to do is to connect the appropriate power and network cables to your router so it can communicate with your network. How you'reconnecting it and what you're connecting to determines the specifics here (ie to connect to a switch/hub use an ethernet cable, for another router, a crossover, for a CSU/DSU you'll use a serial cable typically....etc). You may need to connect a console cable and configure hyperterminal to configure the router or it may use another configuration interface. You'll need to check your documentation. Once the router powers up, you'll want to use your management software to connect to it. In a nutshell, you'll want to set IP addresses on its ports, configure NAT (if you're using it), create passwords/set security (particularly with telnet), configure routing (Static routing, RIP, IGRP, OSPF, etc). Then you want to make sure the ports are live and that you can successfully ping other devices. Your documentation should provide a lot of details about the required steps. If you don't have good documentation (or if, for example this is a Cisco Router - or other high end router) I'd recommend you buy a book on router configuration. If you're using a Linksys, etc (small home router) the process will be much easier and they usually have excellent documentation on their website.
by alpha-male
The primary difference between a router and a switch is that a router is a layer-3 device and a switch is (usually) a layer-2 device. The router works on the network layer, breaks up broadcast domains and directs traffic between networks by finding the appropriate path. A switch works off of a switching table using MAC addresses (Data Link Layer) to break up collision domains. In a nutshell: a switch breaks up a network and routs traffic between the mac addresses it knows (and broadcasts to those it doesn't). A router directs traffic between networks by the most "efficient means" it knows. If you need more detailed information, let me know.
You may want to take a look at www.whatis.com
Router:
http://searchnetworking.techtarget.com/sDefinition/0,,sid7_gci212924,00.html
Switch:
http://searchnetworking.techtarget.com/sDefinition/0,,sid7_gci213079,00.html
Comparison between Routers and "Layer-3 Switches" (which are pretty much router/switch combinations):
http://searchnetworking.techtarget.com/originalContent/0,289142,sid7_gci803146,00.html
Delete any spaces in the URLs
Good luck....hope this helps!
by anny james
Alpha-Male
I like your breif explanation of the difference between a switch and a router please I need more detail information.
Thanks.
Anny
This discussion is closed to new replies.
Sort by Trending