Discussion Locked

Configuring 8 gig as extra or ?

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I bought external 8gig hardrive. I sent and copied programs and files to it. The problem is that when I try to open them up on the e:drive they wont open. They will on c: I have A: C: D:
abd now a E: What am I doing wrong? What did I do wrong. MY COMPUTER shows an E: Do I need to reconfigure master slave in my laptop or WHAT?

4 replies

by evkuo

There are tons of files and settings that will still be pointing to your C: drive. We're talking shortcuts, .ini files, registry entries, etc. I'd recommend reinstalling all your apps to your E: drive to do it cleanly and completely.

by csmith

This is not a hardware problem.
The C: drive in your laptop should remain both the master, and the boot drive.
The laptop should recognize the second hard drive , when it is plugged in.
(I assume you have an internal CDROM.)
This usually is an OS problem.
If you are running programs from the second hard drive, (not recommended) make sure it is included in the PATH statement.
If you are using the second hard drive to store data, DOCs , Spreadsheets, etc. , the program on the C: drive should immediately open them, as soon as you click on them.
If not, there is something wrong with the file associations.
If this problem gets really obnoxious, reload Windows with the second hard drive installed.
Regards, Chris

by stuart_at_oz

Steven,

The good news is you shouldn't have to touch the Master/Slave settings on your laptop.

When you say 'they' won't open, do you mean individual files or a program?

If you have moved files but not the program that opens them, then the files should open fine.
EG, if you moved all your Word documents to the new drive, but the actual Word program is still installed properly on your C: drive then is should be OK.

If you have moved BOTH the file and the program that opens them to the new drive, then the operating system is probably still looking in the old location for the program.

You can't just 'move' an installed program from your C: drive to another drive - there are also many (MANY!) settings in the registry and elsewhere that will still be pointing to the old location. You may get lucky with some of the smaller or less sophisticated programs (I have done this with Lavasoft's Ad-Aware on Win98 successfully) but this also probably depends on your operating system too.

There are 3 ways around this that I can see:

1. move the programs back to their original locations if you can. It will have to be their EXACT location, so Windows can find them again.

2. reinstall the program in the new location to correct the registry and other hidden settings for the location of the program. (probably the easiest way if you still have the install disks.)

3. Get a utility that can troll through the registry etc to move all the references to the new drive. PQMagic has (had?) a utility that does this, but it's been a long time since I have used it, and it may also depend on your O/S.

This discussion is closed to new replies.