Discussion Locked

Conflicts

0 helpful
1 reply
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Our company bought some computers that have 3Dfx and sound cards installed. The sound card is an ISA type an 3Dfx is placed on PCI. The video card is placed on PCI too ( Voodoo on PCI 2, video on PCI 1, sound card on ISA 1)
If i let the sound cardon ISA 1, Windows won't detect the 3Dfx.
If I put the sopund card on ISA 2, windows won't detect the sound card , but I have the 3Dfx.
If i put the sound card on ISA 3, both of them will work.
Do you have a logichal explination for this ?
When i say "Won't detect" i mean Windows doesn't realize the card is in the computer. All components are plug'n'play !

1 reply

by fatherfox

Depending on the board, it could be a sharred bus issue. like for example the isa and pci that are right next to each other on one of my systems, are situated in such a way that you can only physically connect either just the isa or the pci card. I had a isa disk controler card with no external connectors plugged into the isa with a sound card in the pci with the stabilizer bracket removed from the controler card so I could use the free isa slot. I soon came to descover that if a card is in thepci slot, the isa won't work as the pci is the maser of that particular bus. I've also been told some cards just take over a sharred bus. Try if you can talk to the boards manufacturer and see if it's a card or bus issue. But in the mean time, if you can make things work just fine as in the third example, and you don't need more slots, I'd just leave sleeping dogs lie.

This discussion is closed to new replies.