7 replies
you have to check with acomputer reseller parts for a device that can do that. I think its called a printer switch. It's simply 1 device with multiple paralell ports.
Leopold
by thechas
It depends on how you are connecting the printers to your PC.
If both printers have USB connections, you can just plug both in.
Since you can only have 1 default printer, select the printer you plan to use most as the default, and select the other as needed.
If both printers are connected using a parallel port, you will need a bi-directional printer switch.
I recommend that you get an auto-switch. That way, you can switch printers using a software program rather than reaching over and flipping a switch.
If you connect one printer using USB, and the other using the parallel port, you can have both connected that same as if both use USB.
Chas
by wlbowers
According to HP and Lexmark both of these printers use usb.
If you have two open ports then install one of them at a time.
Use the CD's that came with the units or download the software from the internet.
Read the install quick guides. Some printers don't want you to plug the printer in untill you are told to by the software.
Once you have one installed and printing then install the other.
If your computer doesn't have enough USB ports I would install a PCI USB port card. I have seen name brands as low as $15.00.
Some usb devices don't like to be used on a hub.
Good Luck Lee
by mc33
by cliffl
From one Cliff to another, first install the all in one printer, following the instructions and get it working. Then install the other printer, you really should not have a problem. However, I have seen a problem with the USB drivers, if thats the case look on the Lexmark Website in case there is a patch that you would not know about.
Regards Cliff
by cliffmo
Poster rated this answer.
by cliffmo
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending