Discussion Locked

Connecting a monitor to a laptop

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hiya, I want to connect a IBM G54 monitor to an IBM 570 laptop. Now on the machine it says that it has detected new hardware but then there is no display on the monitor. When I connect the monitor to another laptop which is an IBM A20m, it works fine.

How do I get the display on the monitor from the 570 machine?

Regards
Dave

5 replies

by chris tingley

Hi,

Have you made sure that you have turned the monitor on from the laptop. There is normally key combination of the function key and a key that has a picture of a monitor on it which toggles between LCD only/Monitor Only/LCD and Monitor.

by mskiproductions

Have you tried switching between the monitor screen and the laptop. Usually on an IBM this can be done by holding down the 'Function' key, and pressing either 'F5' or 'F7'.

Hope this help's you in your efforts.

Matthew Shine.

ComputaCenter, Europe.

This discussion is closed to new replies.