Discussion Locked

connecting a printer and a scanner

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have a Lexmark 2030 series and a Paperport One Touch scanner. I can use the printer if the scanner isn't hook up, but when I hook the scanner up, I am not able to print anything. It is putting the print job on hold in the spool manager. I cannot get it to print from there either.

9 replies

by nvpaladin

. From the Windows "Start" button, select "Programs", and then the "Lexmark" program group.

2. From the Lexmark program group select the "Control Program Utility".

3. Select the "Options" tab, and uncheck the box labeled "Allow DOS printing" OR check the box labeled "Disable DOS Printing", depending upon which choice you have.

4. Restart the computer and try scanning again.

If the problem is still present, try uninstalling the printer driver and reinstalling it. Have the installation software that came with the printer available for this procedure

Only answer I could find.........Hope it helps. I assume that the scanner scans when connected...

by noodle

Also you might check if the printer port is set to ECP (Extended Capability Port)which many new scanners need (including mine)to
work with other peripherals. If it's not
carefully make the change within the systems bios.
hope this helps...

by robbi61

I know this might seem too simple, but is your cable ieee 1284 compliant? You'd be surprised, but the older printer cables aren't, and not everyone realizes this. Always check the simple stuff first...

by tek4u

Having had a simmilar problem and doing all the above, I found that the printer wanted to talk to the computer all the time so here's what i did to solve the problem i installed a second printer port card in the computer as (lpt2 )and connected the scanner to it all my problems went away.. sure hope this helps..?

This discussion is closed to new replies.