Discussion Locked

Connecting old laptop hd to new pc?

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hello everyone,

Call me lazy but I didn't think it would be fair to me to search for hours to find some down-to-earth instructions on how in the world to do the following:

I have a Toshiba laptop hd that I would like to connect to my much newer desktop pc. My laptop crashed back in October of 2005 when I was trying to install a wireless usb adapter (I was running xp home on it).

Here's what I have on hand:

-precision tools
-laptop hard drive to EIDE adapter
-toshiba 7 gb non-bootable hard drive (config.sys is corrupt on that system's hd)
-emachines t3104 pc running both linux and windows xp home

Will somebody please save me from the confusion and just give me a 1-2-3 type of installation?

Please, pretty please?

Thank you mucho!

Anna

5 replies

by nap jones

Anna,

This should be pretty easy since you have the 2.5 mobile hard drive adapter. Make sure that the power on the desktop is off and unplugged and that you are grounded. Set a jumper on the laptop hard drive to be a slave. Instructions are normally on the drive. Open your case, take the laptop hard drive and attach the 2.5 mobile hard drive adapter, make sure that pin 1 lines up with pin 1 on the adapter, (most are marked) also pin 1 when looking at the laptop hard drive is closest to the 4 master/slave jumper pins set to the right on the hard drive. Connect the ribbon cable to the adapter making sure to once again line up pin 1 with the stripe on the ribbon cable. Plug in the power on the adapter to one inside on your case. Plug in and boot your system. You should see the drive within "My Computer".

by annaquindlen

Spectacular method of describing the process! Thanks a million!

:-)

I'm going to run in a few minutes and try to implement your instructions.

Wish me luck.... he he he

by jkey122857

You probably could have repaired the laptop by using the repair option. Pertaining to your problem. Are you trying to set the laptops hard drive up as a slave in order to recover your files from that drive? If so, and if this is a temporary solution, then I would suggest using the secondary IDE channel. Make sure that your computer is turned off when you go trough these steps. Just remove the CD/DVD ribbon cable from the mother board and put your laptops hard drive using your adapter in that spot. This will give you the ability to copy your files onto your new computer. Just open up MY COMPUTER and the drive will show up there. No hassle of changing PIN settings or going trough the trouble of configuring your new hardware.

by annaquindlen

Hi there! You've also given me some really awesome information!

He, perhaps I should have provided a little bit more detail as to why I am resorting to using the adapter to connect my old hd to my new pc. Well, here's the story:

I had a cool little old laptop with 128 mb of RAM and god only knows how slow of a processor....this was my first ever "computer toy" so naturally, I tried to tweak it, (it initially only had 64 mb of RAM so I added a little more), I removed the laptop's original hard drive (an older toshiba hard drive) and installed a newer toshiba laptop hard drive (same size) since that saved me from having to officially "upgrade" from windows 98 to windows xp home.

So, the CD drive never really worked on the laptop and the bios is so old that it doesn't really allow for booting from cd or usb or anything else. Trust me, I tried and thought of everything under the sun (including using Etherape to attempt to do a network resuscitation of that system).

In any event, there's no functional CD drive and definitely no functional floppy (I didn't mess up either of those two devices), and to top it off, when I tried to install the Netgear wireless usb adapter, something really nasty happened during the initial autorun setup of the product and that was the last that I've seen of my once functional laptop.

:-(

BUT.....now that I got some great tips from you and from Nap, I'm once again going to be on my merry way.

Many many thanks!

:)

This discussion is closed to new replies.