Discussion Locked

Copy portable hard disk to new hard disk

0 helpful
10 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have a user's portable that has bad blocks on it, and keeps crashing. We have purchased a new hard disk, however, he wants to keep all the settings and software as it is. We have no restore CD. Can anyone think of the best way of transferring the data from one disk to the other, or are there any utilities available.

10 replies

by brelf

I have just been looking at Ghost... it will do PC to PC OK, but if I only have one portable and 2 hard disks, I don't think Ghost will help. A PCMCIA Boot Disk may help, if there is such a thing.

by allan

Buy a cheap Parallel Port to IDE box and a 3.5" adapter to a 2.5" adapter and plug it all together - use Ghost to copy to second hard drive then remove the laptop drive & replace it with the drive from the external box.
The bits you need will cost about ?40 (Sterling) and are available at CPC or Maplins in the UK
The only other alternative is to backup to some other media say JAZ and restore to the new hard disk - costs a little more if you need to buy JAZ - OR you could laplink the image to a desktop system - change drives and laplink it back then fiddle with boot disks etc.

by allan

YOU SHOULD NOTE THAT ANSWER 3 BELOW, although being helpful - IT IS AGAINST COPYRIGHT LAW!!! DON'T DO IT!!!!!!!!!!!

by ankit0

the utility is available for copy the entire hard into the other hard disk even the driver of the cards as it is
the utility is GHOST by sementec or norton(if you want i will mail u that small exe file)in this utility there is a option to copy entire disk to disk.

by dryuriy

Faster way is to get PCMCIA IDE adapter and and 9X or 2000 will recognise it. If NT 4 insatll driver will have to spend some time with it :). Than use same ghost or xcopy if it's 98

This discussion is closed to new replies.