9 replies
by lllawson9 Accepted solution
by ernesto.valenzuela Accepted solution
High light what you are going to copy
Type Ctr c
Then go to the dos shell
Click on the small C:\ on the top left corner
Move down to edit
paste.
by toivo talikka Accepted solution
by lllawson9 Accepted solution
Thanks to all for your help.
Ernesto, your reply was just what I needed. I really appreciate it.
by tonythetiger Accepted solution
if you type dir c:\dir1 [enter]
then press F2 and "1", it will fill in up to
dir c:\dir
and you can just put a '2' on the end
Or use your up arrow to repeat previous commands and change the part you want different.
by 1bn0 Accepted solution
Tree prints a graphical view of the file structure.
i.e.
P:\sample>tree
Folder PATH listing
Volume serial number is 00002EBC AC24:FD25
P:.
├───Folder 1
├───Folder 2
└───Folder 3
Tree /F prints the tree and the files in each directory.
P:\sample>tree /f
Folder PATH listing
Volume serial number is 0000093A AC24:FD25
P:.
│ Copy (1) of filename1.txt
│ Copy (2) of filename1.txt
│ Copy (3) of filename1.txt
│ Copy (4) of filename1.txt
│
├───Folder 1
│ Copy (1) of filename1.txt
│ Copy (2) of filename1.txt
│ Copy (3) of filename1.txt
│ Copy (4) of filename1.txt
│
├───Folder 2
│ Copy (1) of filename1.txt
│ Copy (2) of filename1.txt
│ Copy (3) of filename1.txt
│ Copy (4) of filename1.txt
│
└───Folder 3
Copy (1) of filename1.txt
Copy (2) of filename1.txt
Copy (3) of filename1.txt
Copy (4) of filename1.txt
Not sure if this output will suit your purposes or not.
by eepman25 Accepted solution
by faradhi Accepted solution
dir [drive]:\ /s
That will list all the files. If you want no header information, add /b.
This way you do not have to copy you can just run once per drive instead of each directory.
by willcomp Accepted solution
Perhaps this will help:
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending