Question Locked

Creating a boot disk

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I am trying to configure SpinRite to see my external SCSI drive. I am told to create a boot disk with the drivers in it. When I boot XP I have no problem seeing this device. But when I create a bootdisk I can not see it.
The device properties are:
-SCSI Disk Device
-Bus Number 0, Target ID 4, LUIN 0

Ok ... and how do I add this to the boot.ini file properly?
Here is what my boot.ini looks like.

[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP
Professional" /fastdetect /NoExecute=OptIn

4 replies

by hal 9000

On the Boot Disc before you do anything else. Once you have these included and set to auto run on boot up the external SCSI Drive should be visible.

Col

by gblossom

I was hoping for a reply as to what that entry might look like. Can you help with that? Maybe it's so obvious I cant see it.

by gblossom

Back to this subject ...
Can someone assist to what the text I would add to the boot disk should look like?

This discussion is closed to new replies.