Question Locked

Creative Audigy PCI Sound Card problem (No sound)

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

i am trying to install a PCI sound card and am having trouble with sound. The card is detected once windows is loaded and there are no device conflicts in device manager. I have removed all other expansion cards and i have upgraded to the latest drivers. I have checked the speakers (these are fine) and both the windows and creative sound/volume utilities are correct. However i still have no sound output (for any type of audio format). My understanding of PCI technology is limited but am i correct in assuming that PCI-X is backward compatible with PCI and therefore the card should work in a PCI-X slot? Does anyone have any ideas on what else this could be or is it possible that i have a faulty card?
(I am using a Supermicro PDSM4 with Windows XP Pro SP2)

5 replies

by robo_dev

If so, then be sure to disable it in Bios. Windows can get very confused with respect to onboard audio versus sound cards.

I would also make sure that some other device that's integrated into the motherboard is not causing a conflict...so try disabling integrated devices that you're not using.

Since windows can see it, it's one of three things:

1) faulty or incorrect drivers
2) faulty sound card

I would try it in another slot, and from there assume that the card has failed.

by older mycroft

... or at the very least, only suitable for a bespoke, PCI-E specific, soundcard (like the X-Fi range).

Don't you have a spare, free, standard PCI expansion slot?

by adriancarthy

Thanks for your suggestions. The only expansion slots available are PCI-x (2 x 133MHz and 2 x 100MHz) I have removed all other cards. I have disabled any other onboard device in BIOS that i am not using (Onboard scsi and one network port) and unfortunately this is has not helped. I am starting to think that it might be a faulty card because as far as i can see there are no conflicts. drivers are uptodate (and reinstalled numerous times). The system is a pretty fresh install and the only programs on it at the moment is Windows XP SP2 and Office. Because i am not used to installing sound cards i am just not sure if it is something that i have done. If any one has anyother suggestions i would love to try them :)

by 4bex

hi there,
did you ever get to bottom of this?

I have purchased 6 Audigy SE pci cards for some DL120 1U servers - I needed to buy the pci-x riser option to accommodate the cards.

Card is seen by windows - drivers install from creative disc, all apps & sliders work but I cannot get any sound whatsoever.

I have also checked the cards in an ML35) tower with starighjt pci-x slot and the card worked first time once drivers installed.

Curiously though on the dl120 - pluggedin external creative usb sound and the windows usb sound driver picked it upp right away and worked.

Am completely baffled by this - so if you got any further I would like to know - i will post response from HP if they ever come back tome.

This discussion is closed to new replies.