Discussion Locked

Cross over cable usage

0 helpful
12 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a Dell PC (Dimension 4300) running Windows XP and an IBM Thinkpad (240) running Windows 2000 Pro. Both have functional serial ports. I'd like to be able to transfer files from my PC to my laptop. DOES a crossover able connect to the serial ports on each computer? Is there any special configuration that needs to be done? Where can I purchase a crossover cable?

Thanks!

12 replies

by bohicam1

A crossover cable connects to a network card on each computer. If you are going to use a serial cable, I believe you must configure a serial (com) port for that.
Good luck!

Mike

by fenaikh

Hi
There are diffrent cross cablestype depinding on the connection and type.There is a cable which has three types serial 9, serial 25, and parrallel which usually called Lap link cable these types will connect directly to a port in the PC. The other type which is CAT 5 which need Net work card.The other one Is aa USB cable which requier special software.

pls visit
http://www.lpt.com/ you will find

more info ....

Connection types are serial, parrallel, USB and Wireless USB network cards (http://www.lpt.com), UTP CAT 5 crossover cables using network card , home phone cableing, a hub with CAt 5 (standard Ethernet networking cable) cable and network card and Wireless network card, power-line (http://www.homeplug.org), and phone lines networking (http://homepna.org).It depends on how close the 2 PCs are and what speed you need and expantion ect. There are many ways where you can connect 2 PC by using Direct Network and Wireless Network.And it depends in what is your porpuse and how fast, effecint, secure and how much you want to spend.wireless networking and USB network cards do not need wiring through your home or opening the computer to install a network card.
Direct Cable Connection which comes with windows.Where youcould use a crossover serial,parrallel and USB cable which needs special software.This Network is limited to that in you have to choose each time which is the Host PC and which is the Guest PC.In this case you can see only the HOSt PC files.

links for more info :
Simple PC to PC Connectivity and Networking
http://www.lpt.com/
Direct Parallel and Direct Cable Connection (DCC) Step-by-Step SETUP
http://www.lpt.com/Support/DCC-SetUp/dcc-setup.htm
DIRECTPARALLELAND DIRECT CABLE CONNECTION (DCC) FAQ INDEX
http://www.lpt.com/Questions/DirectParallelFAQ/directpar allelfaq.htm

Good luck

Mohamed

***Very Important NOTE *********
After you copy the UR

by william jay

DUN, pure and simple, set to Direct Cable Connection on Com1 or Com2, and requires a Null Modem Cable, available at your local HW store or Businees Depot. . cheers.

by shanghai sam

If you want to make up your own 9 pin cable here are the connections:-
pin 1 ----- n/c ----- pin 1
pin 2 --------------- pin 3
pin 3 --------------- pin 2
pin 4 --------------- pin 6
pin 5 --------------- pin 5
pin 6 --------------- pin 4
pin 7 --------------- pin 8
pin 8 --------------- pin 7
pin 9 ----- n/c ----- pin 9

Then follow answer 5's suggestion and hay presto
you should be able to transfer files to your hearts content. PS dont forget to share files/drives.

This discussion is closed to new replies.