7 replies
Devices that need to communicate must have the ability to send and receive data. The device connectors are assigned a pin (or pins) to either send or receive data. If two similar devices are connected together, a straight-through cable will then connect the transmit signal on the first device to the transmit signal of the second, and the same for the receive signals. A crossover cable ensures that the transmit pins on one device will "cross over" and connect to the receive pins on the other.
BTW, this is necessary for all types of connections, not just ethernet. For instance, RS-232 serial lines have a transmit and receive pin, so a cross-over cable would be necessary to link two serial ports together (this is known as a "null modem" cable). This cable will also have to cross over clocking signals as well (DSR to DTR).
Hope that helps,
by noonan
by bowieb
The previous answer is right. I just wanted to add that Hubs and Switches do the crossover for you. That is why you can use a straight-through cable from your computer to a hub or switch.
You may also notice that the ports on a hub are marked'MDI-X'. The 'X' is for crossover. The uplink port on a hub is only 'MDI' because it doesn't do crossover (for hub-hub connections).
by noonan
And just to add a little more...
A crossover cable is a cable that is used to interconnect two computers by "crossing over" reversing) their respective pin contacts. Either an RS-232C or an registered jack connection is possible. A crossover cable is sometimes known as a null modem. Possible reasons to connect two computers directly to each other include:
Playing a game competitively (one person at each computer) with fast response time
Testing one computer by examining its behavior at the other computer
Saving the cost of a hub when you want to interconnect two devices in the same
home or office
Taken from http://whatis.techtarget.com/definition/0,289893,sid9_gci213562,00.html
by noonan
by noonan
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending