Discussion Locked

DDS3 or DDS4 backup tape

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Can a cartridges of DDS3 fit into DDS4 tape drive?

2 replies

by djent

yes, if you used hardware compression you may not be able to read them as there is no standard for HW compression.

by timwalsh

If your question is "Can you use a DDS3 tape in a DDS4 tape drive?", the answer is probably. All DDS4 drives that I am aware of can read from and write to DDS3 tapes. Physically, the form factor of the tapes is exactly the same

If your questionis "Can a DDS4 drive read a DDS3 tape that already has data on it?", the answer is it depends.

As Answer 1 suggests, if a backup tape was created using hardware compression, it MIGHT not be possible to read it on a different tape drive (usually drives from the same manufacturer, even if they have different capacities, don't present this problem). Also, backups created by one software package CANNOT be read by different software packages.

Hope this answers your question.

This discussion is closed to new replies.