9 replies
by yagar
Partition magic is the answer if you want to save the existing WIn95. If you change it with Fdisk you will not have and OS after.
If you are going to reload windows then Fdisk will do fine.
Good luck
by tradeworks
by ntoz
The answer is yes and yes.
You can use either FDISK to delete the second partition or partition magic. You would delete the partition and then Use partition magic to expand partition one. It wont magicaly happen after you delete the second partition. I would use partition magic to do the whole thing. Delete the partition, drag partition one to fill the space of partition two and then commit the changes. It works nice.
I do have concerns though, if your version of windows 95 is the retail version, your using fat16. Fat16's use of large clusters would make for a much bigger waste of drive space on a 2 gig partition, you would almost be better having two separate smaller partitions. If your using Windows 95 OSR2 then your using FAT32 and I wouldnt be concerned as much. If you are using Retail Windows 95, I would suggest an upgrade to at least Windows 98 SE. You can tell what version of Windows 95 your using by oberving startup. When starting up, when you get the first Windows 95 screen, a moving bar is running at the bottom. If its running from left to right, its Retail Windows 95, if its running right to left, its OSR2. You can also check in Partition magic if the partition is FAT16 or FAT32. If its FAT16 and your using Windows 95 Retail, DONT convert it to FAT32 or you will be SOL. Email me if you need to know what SOL is! GRIN!
Pete
P.S. You should always backup your data before doing any changes such as this.
Pete
by tradeworks
by dread73
by tradeworks
You can delete the second partition with Partion Magic (even if you have PM on a floppy disk).Then you can resize the first partion to have a single partition of 2 GB. Reboot and you are done.
Good luck, Eric.
by tradeworks
by tradeworks
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending