Question Locked

Dell Dimension 1100

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Machine had to be rebuilt. Now does not recognize CD player. C drive and Network all it sees. No D drive. Player ok as a replacement not recognized either. Unloaded 82801 Ultra ATA Storage Controllers. XP found correctly and installed, but still no D drive. Replaced ribbon cable, reseated connections. All zippo.
Bios states not installed but cannot find.
Thoughts..suggestions??
Thanks,
Don

6 replies

by ken-lm

"Bios states not installed but cannot find."

Do you mean that the BIOS sais it is not installed, or that it is installed but you cannot find it in XP?

by clausend

Hi Ken,
When entering BIOS setup, BIOS shows C drive installed and no other. Does this help?
Don

by ken-lm

As Sgt_Shultz said, check to see how your jumper is set. If it's CS, try Master... etc.

Any luck?

by sgt_shultz

perhaps your new motherboard wants your cd to be jumpered as CS not master or slave. i would check the jumpering

by clausend

Sorry about that. Should have mentioned it, I tried that as well. I read a post from Dell that stated that jumper needed to be in cable.
It wasn't. Tried that but still no luck. Tried CS as well no luck. Interesting enough I placed the ribbon connection from the CD unit into the Hard Drive location on the motherboard and of course without the OS it would not boot but the BIOS recognized the player as a CD unit. I'm wondering if there might be a board problem with or around the connector from the CD player on the motherboard.
I don't want to spend a great deal of time on the machine as its not worth much but thought I could place it in a "non-heavy" usage location but not without a CD unit for software additions.

This discussion is closed to new replies.