Question Locked

Dell Dimension 4700 series System will not boot up to OS

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

i have a dell dimension 4700 3.0 ghz, 1GB ram i added another 1GB DDR2 4200 533Mhz to the existing (2)x 512 3200 pc2 then started to get memory has changed press "F1 to cont or F2 to go setup. I selected F1 & got blue screen when i restarted the pc, I got the blue error Screen and it continually fails to startup to OS.

can anyone help if possible

4 replies

by captbilly1eye

At first look, I wonder if that RAM combination will work.
Have you checked with Dell to see if the new stick will work along with the existing two sticks.
Usually, different types of RAM won't play nice together.

by w2ktechman

Often RAM needs to be installed in pairs to function properly.
You may either have a faulty chip, or a chip that is different from the other chips already on board.

by r.gayle

Hi, Thanks, the manual says i can mix the two but 2 remember the system will run at the slowest DDR dimm. last night i connected the hard drive up to my other system as slave, and was able to access the drive no problem, but when it starts up it goes as far as "windows is now starting" then it gets the blue screen. how do i get the system dell 4700 utility to repair or reinstall (if this is an option?) ideas welcome. thanks

This discussion is closed to new replies.